Crash Bars
One of the biggest advantages of our crash bars system is the all around 27mm diameter tubing that rests on 4 and 5mm thick steel mounting tabs and offers reliable protection for fairing, radiator.
Features
- Quality 27mm/1.06″ steel tube with 2mm wall thickness – any low quality steel tubing BELOW THESE SPECS will be crushed when your 450lbs+ bike crashes into the ground. Our guards are designed to take the beat!
- One of the biggest advantages of our crash bars system is the all around 27mm diameter tubing that rests on 4 and 5mm thick steel mounting tabs and offers reliable protection for fairing, radiator.
- Hand MIG welded – It’s all about the strength! We continue to follow our philosophy: toughness and functionality over appearance.
- Less is often more. The design is based on the philosophy that less is often more, hence we created a compact, sturdy set of crash bars that do not reach far away from its mounting points. This system perfectly complements the sporty, aggressive lines of the CRF1000L Africa Twin.
- Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!
Engine Case Guard
Right off the bat, you can see that it’s more than just an engine guard. The 27mm diameter reinforcement bar ties the engine guard and the crash bars together, increasing the strength of the overall system. This design allows for even large impacts to be distributed throughout the entire system, minimizing damage to the bike’s engine, frame and other vital components.
The engine guards are secured entirely onto the frame using 4 and 5mm steel tabs, knowing that the engine cases are the most exposed in all tip-overs, we designed these for maximum strength.
Overall
- Engine Case Protection – entirely frame mounted, thus the fragile engine is not exposed to forces transferred to it due to crash impact
- Crash Bars Reinforcement – the engine guard is tied into the crash bars through a reinforcement bar.
- 27mm diameter tubing – handles the weight of the bike under impact (crash).
- Sandblasted and powder coated surface – simple and tough coating that lasts.
Marques Nicolas (verified owner) –
Je suis très satisfait, produit de qualité, livraison impeccable, je n’ai pas testé l’efficacité mais ca fait très costaux et le look est sympa sur l’africa twin.
admin (store manager) –
Je vous remercie. Nous apprécions vos commentaires et heureux d’apprendre que vous aimez nos produits Africa Twin.
Rashid Marco (verified owner) –
It saved my bike’s life several times! Best accessory ever for the Africa Twin 1000
admin (store manager) –
Thank you for the feedback, Marco! Great to hear that the investment into our products has already paid off.
Holger Enok (verified owner) –
Frank Devooght (verified owner) –
Good protection , better than honda original parts. Looks great to
admin (store manager) –
Appreciate your feedback!
Andrea V. –
A really good product! Functional and very beautiful visually! Very kind and helpful team! Super recommended!!!
admin (store manager) –
Thank you for the superb feedback, Andrea!
Adrian S. (verified owner) –
Great kit, well made with easy to follow instructions.
admin (store manager) –
Cheers, Adrian. We do appreciate your feedback.
Jorge Ortega Morales –
Federico Mignani (verified owner) –
Great quality, package and instruction very complete. Shopper in Europe in a weekend from the order
Emmanouil R. (verified owner) –
Anonymous (verified owner) –
Already crashed and the bars did a great Job 🙂
Paul green (verified owner) –
So happy with my purchase
Anonymous (verified owner) –
Peter G. (verified owner) –
Great support when buying. Great support with the necessary adaptation of my SW-Motech skid plate to fit to the Crash Guard. All part fitted almost perfectly when mounting them on the bike. The Crash Guard is just as sturdy as I expected.
Lorant (store manager) –
Awesome! Thanks for your feedback. Much appreciated.
Anonymous (verified owner) –
Très bon produit de très grande qualité
Guillem (verified owner) –
Very good product. Strong and easy to install. Good service by the seller.
Bernardo (verified owner) –
The crash bar seem to be very strong. Thanks God I haven´t tried it yet!! The aspect of the bike is also very nice.
denis valkenberg (verified owner) –
trés bon materiel que je recommande toujours
Claudio Marinangeli (verified owner) –
Possibly THE BEST crashbars for the Africa Twin. A great side benefit is that they are by far the least aesthetically intrusive. I even forget I have them on when I look at my Africa Twin.
Ralf S. (verified owner) –
The installation is a bit tricky – especially if using the combo – but in the end everything fits. The first right bar had a slightly wrong welded flange resulting in not fitting drill holes but Lorry was very cooperative and just sent me another bar for free! The new one fitted perfectly.
I really appreciated the communication with Lorry and the perfect service.
The crash bars look really great and solid, fortunately I haven’t had the need to use them so far.
Best regards, Ralf
Natale C. (verified owner) –
ottimo prodotto
alexm186 (verified owner) –
Good quality, fast shipment, very good packaging.
However, I have some complaints:
1. the DCT motor cover must be removed in order to mount the crash bars.
2. fitment could be better, there is quite a struggle to align everything together.
Overall I am satisfied with the product.
Kevin (verified owner) –
Gran calidad, totalmente recomendables, si te lo estás pensando no lo dudes. Además cualquiera duda es resuelta por estos profesionales. Gracias por todo
Jaanus (verified owner) –
Very nice and strong crash guards
Diego A. (verified owner) –
The screws are easily stripped and easily loosened.You must tight them firmly,particurarly the congiuction screw betwen up and down crash bars.For the rest I’m really satisfied!
Roman Pinciuk (verified owner) –
Quality is superb. Fitted cage myself and it took me good few hours to do it but well worth it. Peace of mind when taking my AT off road knowing how sturdy the cage is.
Kevin S. (verified owner) –
Great bars , good fit. Despatched and arrived as planned.
Mario Sartori (verified owner) –
Great quality but difficult to mount.
Lorant (store manager) –
Hi Mario. Thanks for your feedback. Difficulty of mounting products depends on many things. For example one’s skills on installing products, tools and a comfortable environment. We do what we can to help customers, hence we offer detailed video installation instructions: https://outbackmotortek.com/vinstallations/#Honda
Simone (verified owner) –
Very good product. Very robust, fiting very well the motorcycle, easy to install with the instruction provided. Good Job !!
Daniel L. (verified owner) –
On a DCT version, it would have been nice if you had informed that you are required to remove and not use the plastic cover for DCT motor. But in all a very nice product!
Gani Sait (verified owner) –
yazid alagil (verified owner) –
Best engene gard & crash bar in the market I tried to change my second motorcycle bmw 1250 but it sold out long time ago
NAVASEELAN JAYARAJASINGAM (verified owner) –
Excellent and heavy duty crash bar and love the look of it, it look simple abs nice.
Mustafa Karaduman (verified owner) –
Danke, ich bin sehr zufrieden . Ich emfehle alle africa twin fahrer.